About Products Residual Gas AnalyzersVacuum Accessories Resources Support Ordering Contact
Support/XT Series Residual Gas Analyzer

XT Series support

Software, documentation, and service procedures

Looking to buy? See the XT Series product page.

Documentation

Configuration files

To download the factory configuration file for your serial number, see the configuration file download page.

VacuumPlus

The Extorr XT Series RGA software package.

All software is free. Upgrades can be performed at any time by downloading and executing the latest version.

All software is forward and backward compatible. If you wish to go back to a previous version, simply download and re-install that version.

Version 1.0.47
August 2023 · 3.3 MB
Download latest
  • Improved filament and ionizer protection from overpressure.
  • Set a target pressure to avoid prolonged operation above the target.
Previous versions (4)
Version Date Changes Size
1.0.40 June 2015
  • File data logging bug fixes. When you open the file in Excel, the timestamp column will appear as a number like 8:24.7. The cells must be formatted as a custom format like yyyy/mm/dd hh:mm:ss.000 and the time in milliseconds will appear.
 3.3 MB Download
1.0.39 June 2015
  • File data logging added, beta version. When you open the file in Excel, the timestamp column will appear as a number like 8:24.7. The cells must be formatted as a custom format like yyyy/mm/dd hh:mm:ss.000 and the time in milliseconds will appear.
 3.3 MB Download
1.0.36 June 2013
  • Bug fixes for Windows 7.
 3.3 MB Download
1.0.34 January 2011
  • Bug fixes for Windows 7.
  • In trend mode, to record total pressure use "0" for mass.
  • To record pirani pressure use "5" for mass.
 3.3 MB Download

XT Standalone Firmware

For custom controlling applications or LabVIEW drivers.

Implements the instrument's command interface directly, without VacuumPlus.

Version 0.13
August 2023 · 976 KB
Download latest
  • Updated with the features available in VacuumPlus V1.0.47.
Previous versions (5)
Version Date Changes Size
0.12 August 2021
  • Fixed sweep data alignment.
 870 KB Download
0.11 July 2021
  • Firmware now starts at the baud rate optionally specified during download.
  • set:BaudRate now responds with acknowledgement ok:BaudRate at old baud rate.
  • Removed extraneous symbols.
  • Trend mode channel "dwell" parameter changed to report dwell instead of scan speed.
  • Filament automatically starts off instead of on.
 786 KB Download
0.10 January 2021
  • Added degas timer.
 360 KB Download
0.9 June 2013
  • Bug fixes.
 137 KB Download
0.8 October 2009
  • Bug fixes.
 136 KB Download

Service procedures

Technical support

Questions about your instrument go to the people who designed and built it. Get in touch.